Caravan Pilots and Mechanics

PLEASE NOTE: You are currently viewing the OLD FORUMS which are working in archived mode. See our NEW FORUMS at this link!

Caravan Pilots

Caravan Pilots from around the World
It is currently Sun Dec 17, 2017 7:06 am

All times are UTC [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Turbine wash
PostPosted: Sat Jun 05, 2010 12:58 pm 
Offline

Joined: Wed Nov 24, 2004 2:25 am
Posts: 18
Location: Central Texas, U.S.A.
The turbine wash appears very simple; remove the ignitor, insert the water tube, begin motoring, and turn on the water. After washing, dry motor twice with no water, close it up, and run the engine.

Couple of questions:

...Will it be effective to use a garden sprayer (with distilled water) by sticking the nozzle into the hole and spray? Not sure how well forward toward the gear box we can shoot the spray as the nozzle will not go inside the hole.

...The manual says to bring up to 5% Ng before adding water, is this necessary? With only a garden sprayer there will not be as much water volume and pressure therefore we are thinking to spray a quart of water and turning the prop by hand. Let it soak a couple of minutes and then motor the engine and spraying again into the hole.

...Also, any pointers on completion you can give before we start and run the engine.

_________________
Texas Caravan Pilot


 
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2002, 2006 phpBB Group
[ Time : 0.033s | 15 Queries | GZIP : Off ]